Công ty TNHH MSG Việt Nam

INSIGHT 4K LASER

Còn hàng - Liên hệ: 02435.525.370, 0903.234.326

With 20,000 hours of illumination life and no lamp replacements required, the INSIGHT 4K LASER delivers bright, stable and color-accurate imagery. All with the stunning detail and image subtlety that only full 4096 x 2160 4K resolution can deliver, and all at approximately 40% of the size and weight of existing 4K projector solutions.

INSIGHT 4K LASER
12,000 Lumens \| Contrast Ratio: 2,000:1 \| Part Number: 114-821
Colour System:					DMD Specification:
3-chip DLP ®					4096 x 2160 pixels native.
					Fast transit pixels for smooth greyscale and improved contrast.
Display Type:					Aspect Ratio: 1,90 : 1
3 x 1.38″ DarkChip™ DMD™					Fill Factor: 87%
Video & Graphics Processing:					Up to 60fps 4096 x 2160 pixels sequential input via single cable (Display Port 1.2)
					3D Capable
					Scaling of HDMI 1.4 formats to fill the 4K display
					Dark Time insertion capability.
					Input 4 (HDMI) can be assigned to overlay a scaled or native image over the main video image
					Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).
					Synchronisation of active glasses or polarising switcher.
ColorMax™					Accurate matching of projectors in tiled or blended applications.
					User selection and storage of primary and secondary user defined color targets up to 7 points.
Projector Control					Keypad with LCD panel.
					Network control via RJ45 and protocol.
					PC Control Application
Source Compatibility:					Graphics standards up to 4096 x 2160 at 60 fps via DisplayPort. 30 fps via HDMI. Higher input frame rates supported at lower input resolution.
Inputs/Outputs
Video / Computer					Communication & Control
Type	Connector			Qty	Type	Connector	Qty
DisplayPort 1.2	DisplayPort			2	LAN	RJ45	1
HDMI 1,4	HDMI			2	RS232	9-pin D Sub	1
Option Board					3D Sync Out	BNC	1
3G-SDI	BNC			4	Wired Remote In	3.5mm Stereo Jack	1
DVI-D	DVI-D			2	Service Port	USB Type A	1
					3D Sync In	BNC	1
Computer Compatibility:					Bandwwith
Up to 4096 x 2160					N/A
3D Formats Supported					HDTV Formats Supported:
Dual Pipe (Q3 2016) Frame Sequential					4096 x 2160p (24, 25, 30, 50, 59.94, 60 Hz) 3840 x 2160p (24, 25, 30, 50, 59.94, 60 Hz) 1080p (24, 25, 30, 50, 59.94, 60 Hz) 1080i (50, 59.94, 60 Hz)




Remote Control:					Automation Control:
Wired remote control					LAN
On – Board keypad with LCD screen					RS232
Colour Temperature:					Operation:
User selectable from 3300 to 10000K					24/7
Illumination Type:					Typical illumination Life:
Laser Light Source					20000 hours
Lenses
Lens		Part No.	Focus Range		Lens Shift
0.93:1 fixed		117-310	0,5m – 100m		Vert: 0.210 (U) 0.210 (D) frame, Hor: 0.08 (L) 0.08 ®
1.13 – 1.72:1		115-627	2,5m – 100m		Vert: 0.340 (U) 0.190 (D) frame, Hor: 0.09 (L) 0.09 (R) frame
1.65 – 2.60:1		115-630	3,5m – 100m		Vert: 0.400 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
2.53 – 4.98:1		115-632	4,5m – 100m		Vert: 0.375 (U) 0.200 (D) frame, Hor: 0.13 (L) 0.13 (R) frame
Lens Mount:					Mechanical Mounting:
Motorised and programmable shift, zoom & focus.					Front/Rear Table
Inteligent Lens Memory with user-definable preset positions.					Front/Rear Ceiling
					Adjustable Front/Rear Feet
					Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.
Power Requirements:					Operating Humidity:
200 – 240VAC 50/60Hz single phase					20% to 80%, non-condensing.
Weight:					Dimensions:
67 kg					H: 32.5 cm W: 70.0 cm L: 93.5 cm
148 lb					H: 12.8 in W: 27.56 in L: 36.8 in
Thermal Dissipation					5027 BTU/Hour
Fan Noise					58 dBA
Accessory					RapidRig™ Frame Ceiling Mount Quad SDI, Twin DVI Card Replacement Filter Set

INSIGHT 4K LASER

Mercury 930

HIGHlite LASER II

TITAN 930 3D

HIGHlite 740