| 13,500 ANSI Lumens (+/- 10%) | Contrast Ratio: 2,000:1 | Part Number: 114-338 | |||||||
| Colour System
3-chip DLP ® |
DMD Specification
1920 x 1080 pixels native, +/- 12° tilt angle. Fast transit pixels for smooth greyscale and improved contrast. |
||||||
| Display Type
3 x 0.67″ DarkChip™ DMD™ |
Aspect Ratio: 16×9
Fill Factor: 87% |
||||||
| Video & Graphics Processing | High bandwidth digital & analog receiver with 10 bit A-D.
Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction. Displayed image frame locked to input with as low as 1 frame total latency. 24p and 1080p native display. Image enhancement for MPEG, Mosquito noise & color transients in composite sources. |
||||||
| Geometry Correction | Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation.
Non-linear Warp adjustment by moving points on an interpolated grid. |
||||||
| Edge Blending | Semi-automated multi projector tiling.
Correction for non-active pixels at the edge of the display. |
||||||
| Super Image Clarity | Geometry correction and Edge Blending implemented in single stage process, retaining maximum image resolution. | ||||||
| Picture in Picture | Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained. | ||||||
| ColourMax | Accurate matching of projectors in tiled or blended applications.
User selection and storage of primary and secondary color targets. |
||||||
| High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency | Pixel mapped to the display.
Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame. HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats. Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display). FastFrame™ Smear Reduction. Dual Pipe processing: two sources in parallel for left and right eyes. Synchronisation of active glasses or polarising switcher. |
||||||
| Projector Controller Software | Intuitive user interface for network control.
Simultaneous control of user-defined groups of projectors. At-a-glance monitoring of projector status. |
||||||
| Source Compatibility | 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI and DVI include Deep Color™ processing up to 36 bit. DVI inputs are HDMI compatible. Digital Audio Extraction via SPDIF for HDMI sources. Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA. Component Video (SD and HD) via YPrPb, RGB or RGBS. S-Video (PAL, NTSC & SECAM). Composite Video (PAL, NTSC & SECAM). Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz. HDMI 1.4 including 3D Standards, Dual Pipe (2 x DVI). |
||||||
| Inputs/Outputs | |||||||
| Video & Computer | Communication & Control | ||||||
| Type | Connector | Qty | Type | Connector | Qty | ||
| DVI-D / DVI-A | DVI-I | 1 | 3D Sync Out | BNC | 1 | ||
| HDMI 1.3 | HDMI | 1 | 3D Sync In | BNC | 1 | ||
| 3G-SDI | BNC | 1 | LAN | RJ45 | 1 | ||
| VGA / Analog RGB | 15-pin D-Sub | 1 | RS232 | 9-pin D Sub | 1 | ||
| Component Video | 4 x BNC | 1 | Wired remote (I/O) | 3.5mm Stereo Jack | 2 | ||
| S-Video | 4-pin Mini DIN | 1 | Update Port | RJ45 | 1 | ||
| Composite Video | RCA | 1 | Service Port | USB Type B | 1 | ||
| Composite Video | BNC | 1 | Main – Dual Link | DVI-I | 1 | ||
| Sub – HDMI 1.4 | DVI-I | 1 | SPDIF Digital Output | RCA | 1 | ||
| 3D Formats Supported
Dual Pipe, Frame Sequential. |
HDTV Formats Supported
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz) |
||||||
| Computer Compatibility
Up to 1920 x 1200 |
Bandwidth
170 MHz on analog RGB 165 Megapixels per second on HDMI and DVI 297 Megapixels per second on DisplayPort |
||||||
| Remote Control
Addressable IR remote control, wireless and wired with loop-through. On-Board invertable keypad. |
Automation Control
LAN, RS232. |
||||||
| Colour Temperature
User selectable from 3200 to 9000K |
Lamp Type
2 x 465W High Intensity Discharge |
||||||
| Lenses | |||||||
| Lens | Part No. | Focus Range | Lens Shift | ||||
| 0.67:1 fixed HB | 105-607 | 1.1m – 10m | Vert: 0.176 (U) 0.176 (D) frame, Hor: 0.063 (L) 0.063 (R) frame | ||||
| 1.12:1 fixed HB | 105-608 | 3m – 15m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 1.12:1 (short) fixed HB | 105-609 | 1.2m – 2m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 1.16 – 1.49:1 zoom HB | 109-236 | 3m-15m | Vert: 0.509 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 1.39 – 1.87:1 zoom HB | 105-610 | 4m-24m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 1.87 – 2.56:1 zoom HB | 105-611 | 4m-24m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 2.56 – 4.16:1 zoom HB | 105-612 | 9.1m – 45m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 4.16 – 6.96:1 zoom HB | 105-613 | 12m – 80m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| 6.92 – 10.36:1 zoom HB | 109-235 | 12m – 80m | Vert: 0.685 (U) 0.5 (D) frame, Hor: 0.188 (L) 0.188 (R) frame | ||||
| Lens Mount
Motorised and programmable shift, zoom and focus. Intelligent Lens Memory with 5 user-definable preset positions. |
Mechanical Mounting
Front/Rear Table, Front/Rear Ceiling, Adjustable Front/Rear Feet, Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments. |
||||||
| Power Requirements
110VAC 50/60Hz single phase |
Power Consumption
1400W |
||||||
| Thermal Dissipation
4778 BTU/H |
Fan Noise
48 dBA |
||||||
| Operating/Storage Temperature
Operating: 0 to 40C (32 to 104F), Storage: -10 to 50C (14 to 122F) |
Operating Humidity
20% to 80% non-condensing |
||||||
| Weight (Chassis Only)
39 kg, 86.0 lb |
Dimensions
L: 68.8 cm W: 58.5 cm H: 25.8 cm, L: 27.1 in W: 23.1 in H: 10.2 in |
||||||
| Safety & EMC Regulations
CE, FCC Class A |
|||||||
Mercury 930
Còn hàng - Liên hệ: 02435.525.370, 0903.234.326
With a light output between 13,500 and 14,500 lumens, Mercury 930 3D projectors employ dual 465 watt high intensity discharge lamps for incredibly bright imagery. DPís ColorMaxô technology presents the most flexible color management system available today, and serves as a powerful color calibration tool, whether the installation calls for a single projector or an array of projectors in tiled or blended applications. A remarkable range of lens shift allows for broad installation flexibility, augmented by a wide fixed and zoom lens array with throw ratios ranging from .67 to 10:36:1.
Be the first to review “Mercury 930”
PRODUCTS CATEGORY
- Digital Projection
- Airport equipment
- Projector screen Remaco
- LED Screens
- Sound systems
- Light
- Accessories Remaco
Related Products
Reviews
There are no reviews yet.