Titan Quad 2000 WUXGA 3D

Còn hàng - Liên hệ: 02435.525.370, 0903.234.326

Delivering a stunning 20,000 Lumens output the TITAN Super Quad offers the best performance on the market today in every significant area.

Titan Quad 2000 WUXGA 3D  
20,000 Lumens | Contrast Ratio: 2,000:1 | Part Number: 113-104  
Colour System: DMD Specification:  
3-chip DLP ® 1920 x 1200 pixels native.  
Fast transit pixels for smooth greyscale and improved contrast.  
Display Type: Aspect Ratio:16×10  
3 x 0.96″ DarkChip™ DMD™ Fill Factor: 87%  
Standard Inputs (1-8): Front End Video Capabilities  
Video & Graphics Processing: High bandwidth digital & analog receiver with 10 bit A-D  
Automatic detection of interlaced video and implementation of 3:2 or 2:2 extraction as appropriate, with pixel based, motion adaptive interpolation and auto cadence correction.  
Displayed image frame locked to input with as low as 1 frame total latency.  
 24p and 1080p native display.  
Image enhancement for MPEG, Mosquito noise & color transients in composite sources.  
Geometry Correction Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.  
Non – liner warp adjustment by moving points on an interpolated grid.  
ColorMax Accurate matching of projectors in tiled or blended applications.  
User selection and storage of primary and secondary color targets.  
High Bandwidth Inputs (9-11): Bypassing Front End for Minimal Latency Pixel mapped to the display.  
Dual Link DVI accepts frame rates up to 160Hz with latency as low as 1 frame  
HDMI 1.4 for Side by Side, Frame Packing & Top Bottom formats.  
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources (example 144Hz display).  
FastFrame™ Smear Reduction  
Dual Pipe processing: two sources in parallel for left and right eyes.  
Synchronisation of active glasses or polarising switcher  
Projector Controller Software Intuitive user interface for network control  
Simultaneous control of user-defined groups of projectors  
At-a-glance monitoring of projector status.  
Source Compatibility: 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.  
HDMI and DVI include Deep Color™ processing up to 36 bit.  
DVI inputs are HDMI compatible.  
Digital Audio Extraction via SPDIF for HDMI sources.  
Graphics standards up to 1920 x 1200 at 60Hz via DVI or VGA.  
Component Video (SD and HD) via YPrPb, RGB or RGBS.  
S-Video (PAL, NTSC & SECAM)  
Composite Video (PAL, NTSC & SECAM)  
High Bandwidth, Pixel Mapped Path:  
Dual DVI accepts graphics standards up to 1920 x 1200 at 120Hz.  
HDMI 1.4 including 3D Standards  
Dual Pipe (2 x DVI)  
Inputs/Outputs  
Video / Computer Communication & Control  
Type Connector Qty Type Connector Qty  
HDMI 1.3 HDMI 1 LAN RJ45 1  
DVI-D / DVI-A DVI-I 1 RS232 9-pin D Sub 1  
3G-SDI BNC 1 3D Sync Out BNC 1  
VGA / Analog RGB 15-pin D-Sub 1 3D Sync In BNC 1  
Component Video 4*BNC 1 Wired Remote In 3.5mm Stereo Jack 1  
S-Video 4-pin Mini DIN 1 Wired Remote Out 3.5mm Stereo Jack 1  
Composite Video RCA 1 Update Port RJ45 1  
Composite Video BNC 1 Service Port USB Type B 1  
High Bandwidth Ports  
Main – Dual Link DVI-D DVI-I 1  
Sub – HDMI 1.4 DVI-I 1  
Audio  
SPDIF Digital Output RCA 1  
Computer Compatibility: Bandwwith  
Up to 1920 x 1200 170 MHz on analog RGB
165 Megapixels per second on HDMI and DVI
297 Megapixels per second on Dual Link DVI
 
 
3D Formats Supported HDTV Formats Supported:  
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
1080p (23.98Hz, 24Hz, 25Hz, 29.97Hz, 30Hz, 50Hz, 59.94Hz, 60Hz), 1080i (50Hz, 59.94Hz, 60Hz), 1080sf (23.98Hz, 24Hz), 720p (50Hz, 59.94Hz, 60Hz)  
 
 
 
 
Remote Control: Automation Control:  
Addressable IR remote control, wireless and wired whit loop-thourgh. LAN  
RS232  
On – Board invertable keypad  
Colour Temperature: Operation:  
User selectable from 3200 to 9000K 24/7  
Illumination Type: Typical illumination Life:  
4 x 465W High Intensity Discharge Full Power: 1000 hours (up to 4000 hours in lamp sequential mode)
Eco Mode : 1500 hours (up to 6000 hours in lamp sequential mode)
 
Lenses  
Lens Part No. Focus Range Lens Shift  
0,67 : 1 fixed HB 105-607 1,1m – 10m Vert: 0.108 (U) 0.108 (D) frame, Hor: 0.044 (L) 0.044 (R) frame  
1.12:1 fixed HB 105-608 3m – 15m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
1.12:1 (short) fixed HB 105-609 1,2m – 2m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
1.16 – 1.49:1 zoom HB 109-236 3m – 15m Vert: 0.408 (U) 0.408 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
1.39 – 1.87:1 zoom HB 105-610 4m – 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
1.87 – 2.56:1 zoom HB 105-611 4m – 24m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
2.56 – 4.16:1 zoom HB 105-612 9,1m – 45m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
4.16 – 6.96:1 zoom HB 105-613 12m – 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
6.92 – 10.36:1 zoom HB 109-235 12m – 80m Vert: 0.567 (U) 0.45 (D) frame, Hor: 0.188 (L) 0.188 (R) frame  
Lens Mount: Mechanical Mounting:  
Motorised and programmable shift, zoom & focus. Front/Rear Table  
Inteligent Lens Memory with 5 user-definable preset positions Front/Rear Ceiling  
Adjustable Front/Rear Feet  
Rugged, staging tolerant chassis with integrated handles.  
Optional RapidRig™ frame with integrated pitch, roll and yaw adjustments.  
Power Requirements: Operating Humidity:  
200-240VAC 50/60Hz single phase 20% to 80%, non-condensing.  
Weight: Dimensions:  
39 kg  L: 68.8 cm W: 58.5 cm H: 25.8 cm  
86,0 lb  L: 27.1 in W: 23.1 in H: 10.2 in  
Thermal Dissipation 8191 BTU/Hour  
Fan Noise 48 dBA  
Accessory Lamp & Filter Kit, 465W, 4 Lamp
Lamp & Filter Kit, 465W, 2 Lamp
Lamp, 465W
RapidRig™ Frame
Ceiling Mount
Infrared Remote (Replacement)
 
Show Buttons
Hide Buttons
error: Nội dung được bảo vệ !!
0903234326